(Original post: here)
I wanted to document this as I could not find a single place that had the fix. I forgot what version(s) I was on for firmware and OS but they were out of date, and the gui kept prompting for updates but they NEVER would work. When I went on site to do the update it pretty much just was stuck and stupidly I didn’t try the cli until I ultimately had to.
I was able to get into the CK initially so I grabbed a backup which also didn’t work at first. Had to reboot, but there was also some on the sd card. You could grab a settings only or full.
After that I thought hey let’s do a factory reset. Did that and then the unit would NOT adopt via the phone app, and the manual uses the chrome extension which is no longer a thing. At this point I was looking at buying a gen 2, then said f this, and thought it has to be accessible via ip or cli as it is “adoptable” but kept failing.
I found some forum posts and tutorials on how to update via cli. With the factory reset the ssh was back to ubnt/ubnt.
Once ssh’d in I did the firmware update first (v1.1.9)
ubnt-systool fwupdate https://dl.ubnt.com/unifi/cloudkey/firmware/UCK/UCK.mtk7623.v1.1.19.f4a17b0.210204.0232.binThis took a bit, I assume the gen1 is pretty slow. The OS/console update took around 30min, I thought it was broken…..
once this firmware is done, I forgot if I rebooted, but I probably did. Then SSH’d back in to do the console OS (7.9.5) I see now that 7.5.7? is available for UCK but was not listed when looking at the devices it supported on the page.
Cd /tmp
Wget https://dl.ubnt.com/unifi/7.2.95/unifi_sysvinit_all.deb
Dpkg -i unifi_sysvinit_all.debThis will take a while but once finished the unit is supposed to reboot itself.
Once it comes back up I was able to hit the device via the ip, https://192.168.1.7:8443/setup and could setup from a laptop on the same wifi/network. I clicked restore from backup which….kinda worked? Uploading the file from the laptop did not do anything but I was not sure if it was sitting uploading and I could just not tell (25mb file)? I Then plugged the sd card back in and rebooted the UCK. Once rebooted I was able to go back in to the setup and click from backup, but it still was not finding any. I said screw it and thought I would setup as new, then restore. I clicked setup as new, it kind of refreshed, I named the new network and then clicked restore and poof the backups from SD were there. I choose the newest one. Clicked restore and this is where it was probably 30-40 min. After almost nuking it again, I waited and it rebooted on its own, came back up with the blue light and was back to it’s old self but with newer console os code. I was able to login and use it again. I still need to update the console OS code but I wanted to document this for anyone with a UCK and similar stuck update issues. I have another gen 1 to update that I’ll have to go onsite for again.
TLDR: do a backup, know your CK SSH (not same as admin), update firmware and console os via cli
resources used:
https://blog.codybunch.com/2017/06/12/Upgrading-the-UBNT-Cloud-Key-by-Hand